Cerium Oxide Fine Grade 50g / 1.7oz
|
€7.52
|
|
50 grams / 1.7oz Fine Grade Cerium Oxide - powder form glass polishing solution delivers an uniform particle size on average 2.5 microns.
Removes surface marks, hairline scratches, water damage, stains, lime scale and also used as final polishing step in multi-stage glass scratch repair process.
Can be used on any type of glass including automotive glass, toughened / tempered glass.
Suitable for use with rotary electric device and felt polishing pad at 1000 - 1500 rpm's
IMPORTANT TO KNOW:
* This product is not suitable for deep scratch removal. Scratches deeper than 50 microns / 0.002 of an inch in depth ( scratches that you can feel or catch with your fingernail)
* Glass polishing can be a lengthy process, on account of the composition of most glass surfaces. In some cases, more than one attempt may be required.
* NOT suitable for mobile phones, tv's, laptops, tablets repairs.
| Polishing Solutions | |
| Size | 50 grams / 1.7oz / Jar |
| Purity | TREO 95% |
| Grade | Fine 2.5 microns |
| Features | High suspension in water, No sharp edges, Clean cut, Fast stock removal, Contains No Zinc |
| Recommended with | felt polishing pad and electric rotary device at 1000-1500rpm's |
| Recommended for | polishing blemishes, scuffs, hairline scratches, lime scale , hard water deposits, adhesive residue |
Measure out the proper proportions of heated water (at least 30ºC/80ºF) and Cerium Oxide into a container and mix thoroughly.
Slurry temperature should be maintained between 32ºC and 40ºC (90ºF and 105ºF) for optimum performance.
Depending on how much water you mix with will depend on the abrasive quality of the paste. If you want a more aggressive paste mix with only a little water, if you are looking to just polish the glass surface then mix with more water.
Clean the glass surface to ensure that all dust and stray particles have been removed. Fit a felt polishing pad on the backing pad and apply half a tea spoon size amount of the cerium oxide slurry to the middle of the polishing pad and place the face of the pad on the glass. Start the rotary device. Keeping the polishing face flat against the glass, move the device slowly from left to right, up and down. Keep a nice even pressure against the glass as you move the pad over the glass. After a few seconds of polishing, milky looking slurry will form. Continue polishing until the slurry is dry. Spray a bit of water to the pad or glass and repeat this process as many times as necessary until the glass is visually clear. Wipe the surface clean and inspect carefully. The glass surface should now be crystal clear.
We ship most domestic and international packages via DHL's fully traceable and signed for service, as well as via our logistic centers located across the UK, EU, USA and Canada.
*All orders shipped outside the EU may be subject to local customs fees or duties. Duty, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying. These charges are collected by the delivering freight (shipping) company or when you pick the item up.